L.U.V / U.T.V – Side By Side

UTV Training Course

Course cost and duration subject to application

Course Pre-requisites

Must be over 16 years of age, will need to supply own vehicle.

Course Details

This training program is structured into six core modules, each focusing on a critical skill area:

  1. Vehicle Familiarization & Safety
  2. Hill Ascending Techniques
  3. Hill Descending Techniques
  4. Off-Road Driving Skills
  5. Driving on Steep Camber
  6. Safe Loading & Vehicle Handling
Module 1: Vehicle Familiarization & Safety

Objective: Understand the UTV’s capabilities, limitations, and safety features.

  • Pre-drive inspection checklist
  • Understanding 4WD systems and traction control
  • Tire pressure and terrain adaptation
  • Emergency equipment and recovery gear
  • Cabin ergonomics and visibility
Module 2: Hill Ascending Techniques
Objective: Learn how to safely and effectively climb steep inclines.
  • Gear selection and throttle control
  • Momentum vs. traction balance
  • Line selection and obstacle avoidance
  • Recovery techniques for failed climbs
  • Use of differential locks and low-range gearing

Practical Exercise:
 Simulated hill climb with varying gradients and surfaces (gravel, mud, sand).
Module 3: Hill Descending Techniques
Objective: Master controlled descents on steep slopes.

  • Engine braking and gear selection
  • Use of hill descent control (if equipped)
  • Avoiding brake fade and wheel lock
  • Maintaining straight-line descent
  • Spotting and communication in convoy descents

Practical Exercise:
 Controlled descent on a 20–30° slope with loose surface.
Module 4: Off-Road Driving Skills
Objective: Navigate through rugged terrain safely and efficiently.

  • Reading terrain and route planning
  • Crossing ruts, rocks, and water
  • Mud and sand driving techniques
  • Recovery methods: winching, snatch straps, traction boards
  • Environmental awareness and Tread Lightly principles

Practical Exercise:
 Obstacle course with mud pits, rock gardens, and water crossings.
Module 5: Driving on Steep Camber
Objective: Maintain vehicle stability on side slopes.

  • Understanding rollover risk and center of gravity
  • Tire placement and slow-speed control
  • When to abandon a camber route
  • Spotter use and communication

Practical Exercise:
 Traversing a 15–25° side slope with uneven terrain.
Module 6: Safe Loading & Correct Handling
Objective: Ensure vehicle stability and performance under load.

  • Load distribution and securing cargo
  • Impact of weight on braking and handling
  • Roof rack and trailer considerations
  • Legal load limits and compliance
  • Emergency maneuvers with a loaded vehicle

Practical Exercise:
 Load the vehicle with simulated cargo and perform braking, cornering, and evasive maneuvers.

BY ENROLLING INTO A COURSE, YOU AGREE TO ABIDE BY OUR TERMS AND CONDITIONS POLICY and REFUND /CANCELLATION POLICY

UTV Training Course​ Booking